Panasonic ToughBook CF-50 Series Operating Instructions Manual page 13

7
Setup Windows
Moving the cursor ( ) or clicking buttons can be performed with the touch pad (
Windows 2000
CAUTION
Do not press any key or move the touch pad until [Windows 2000 Professional Setup]
is displayed.
At [Welcome to the Windows 2000 Setup Wizard], select [Next].
1
After reading the agreement, select [I accept this agreement] or [I don't accept this
2
agreement], then select [Next].
NOTE
If [I don't accept this agreement] is selected, the Windows setup will be aborted.
Select settings for your region, then select [Next].
3
Enter your name and organization and then select [Next].
4
Enter your computer name and administrator password and then select [Next].
5
CAUTION
Remember this password! If the password is forgotten, Windows 2000 cannot be
operated.
Enter the correct date, time and the time zone, then select [Next].
6
At [Networking Settings], select [Typical settings], then select [Next].
7
At [Workgroup or Computer Domain], select [No, this computer is not on a network,
8
or is on a network without a domain], then select [Next].
The computer will restart.
At [Welcome to the Network Identification Wizard], select [Next].
9
At [Users of This Computer], select [Users must enter a user name and password to
10
use this computer], then select [Next].
Select [Finish].
11
Enter your administrator password and select [OK].
12
CAUTION
After setting up Windows, a message may appear, and this computer may restart auto-
matically. When restarting the computer, do not touch the keyboard or the touch pad.
NOTE
After setting up Windows, you can use "Icon Enlarger" to change the size of
the icons, etc. as you like. To use this, select
larger] in [Start] - [Programs] - [Panasonic].
<Only for the model with a wireless LAN>
If you use the wireless LAN, be sure to refer to the Reference Manual's "Wire-
less LAN".
page 19).
on the desktop or [Icon En-
13