Mercury 2005 Monterey Owner's Manual page 120

Seating and Safety Restraints
6. With the assist handle, pull the
seat rearward.
7. Remove the seat from vehicle.
Installation of second row seats
Prior to installation, ensure that the seats are on the correct side of the
vehicle. Ensure that the seat is positioned so that the seat belt buckle is
near the center aisle of the vehicle. The seatback must be folded flat
prior to installation.
1. Position the seat in vehicle. Place
first row seat in a forward position
to allow the second row seat to be
installed.
2. Install seat onto rear pin of front
tub at a 30 to 45 degree angle.
119
2005 Monterey (mty)
Owners Guide (post-2002-fmt)
USA_English (fus)