Install And Format An Optional Memory Card - HP Photosmart E427 Quick Start Manual

computer, and will ensure that images are accurately
marked if you use the date and time imprint feature.
1. Use
to adjust the
highlighted value.
2. Use to move to the
other selections and
repeat Step 1 until the
date and time are set
correctly.
3. Press
when the date, time, and format settings
are correct, then press
Install and format an optional
memory card
This camera supports standard and high speed, HP-
branded Secure Digital (SD) memory cards, 16MB to
1GB.
1. Turn off the camera and open
the Battery/Memory card door.
2. Insert the optional memory card
in the smaller slot as shown.
Make sure the memory card
snaps into place.
3. Close the Battery/Memory card
door and turn on the camera.
Always format new memory cards before first use.
Formatting removes all images from the memory card,
10
again to confirm.
HP Photosmart E427 Digital Camera