Table of Contents
Advertisement
SET PROFILE 1
RINGER VOL.
1
To set the ringer volume:
1. Enter the Set Profile display and use the
2. Press the
increase or decrease the volume. The handset will produce the ringer sound in the
increased or decreased loudness setting. It is also possible to switch the ringer
volume OFF in this setting.
3. Press the
display.
9.1.3. Key Click Tone
The key click tone setting determines whether or not the handset bleeps every time a
key is pressed. The key click tones can be switched on or off.
To switch the key click tones on/off:
SET PROFILE 1
KEY CLICK.
1
1. Enter the Set Profile display and use the
2. Press the
select on or off and the loudness of the key click. The display will show the
loudness of key click or key click off.
3. Press the
9.1.4. Vibrator
The vibrator function can either be on or off. The vibrator functions when the handset
is ringing or bleeping, it vibrates in the same pattern as the ringer or bleep sound. The
vibrator function is not available in intrinsic safe versions of D500 handsets.
32
RINGER VOL.
OK
key to enter the ringer volume display. Use the
OK
key to set the volume. The handset will return to the Set profile
OK
KEY CLICK.
OK
key to enter the key click display and use the
OK
key to return to the Set Profile Menu.
OK
or
2
or
or
2
or
RINGER VOL.
OK
3
key to select ringer vol.
or
KEY CLICK
OK
OFF
3
key to select key click.
or
keys to
key to
Advertisement
Table of Contents
