Using The Midlet Wizard To Create A Project - Motorola T720 Developer's Manual

Figure 6.
The CodeWarrior project manager also creates a directory named ProjectName Data,
where ProjectName is the name of your project. The CodeWarrior IDE uses this directory
to store internal data. Do not modify or move any files in this directory.
A project that is created from stationery contains example source files, and other files that
provide you with a starting point for your project. You can modify these files and save
them with a new name, or replace them with your own files.

Using the MIDlet Wizard to Create a Project

The following procedure shows you how to use the MIDlet Wizard to create a new MIDlet
project. The MIDlet Wizard creates a project that is configured for a MIDlet that uses
graphical user interface (GUI) components. The project takes advantage of the
CodeWarrior RAD tools, which help you create GUI components.
This procedure consists of the following sections:
•
The New Window
•
MIDlet Wizard - Page 1 of 3
•
MIDlet Wizard - Page 2 of 3
•
MIDlet Wizard - Page 3 of 3
•
MIDlet Wizard - Summary
The New Window
The New window (Figure 7) is where you specify the name and location of the new
CodeWarrior project. You also specify the wizard to use to create the new project.
To start the MIDlet Wizard:
1
24
Project Window displaying project created from J2ME Stationery
Open the New window.
Select File > New from the main menu bar. The IDE displays the New window
(Figure 7).