Playback Features; Basic Recording; Playing Back Tape Repeatedly; Auto Repeat Play - JVC HR-A590U Instructions Manual

– Playback –

Playback Features

Adjusting tracking condition
– Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the signal
to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET –/+ on the Remote to eliminate the
noises. Press it briefly for a fine adjustment, or press and
hold for a coarse adjustment.
• Press SP/EP on the Remote again to reactivate automatic
tracking.

Playing back tape repeatedly

– Auto Repeat Play

1 Access Menu screen
Press MENU on the Remote.
Press SET –/+ to select "AUTO
REPEAT".
2 Select ON/OFF
Press ENTER to select "ON" or
"OFF".
Press MENU to return to normal
screen.
3 Start Auto Repeat Play
Press PLAY. The tape will play
over and over until the repeat
mode is canceled.
Recording
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its record safety tab. To record on
it later, cover the hole with adhesive
tape.

Basic Recording

1
Make sure the record safety tab is
intact. If not, cover the hole with
adhesive tape before inserting the
cassette.
• The VCR turns on, and the counter
is reset, automatically.
2
Press CH–/+ or the Number keys on
the Remote [CH–/+ on the VCR].
• If you connect the TV and the VCR
only using the RF connection, press
TV/VCR on the Remote so that the
MENU
TV/VCR indicator lights to view the program to be
CLOCK SET
TIMER REC SET
recorded.
AUTO REPEAT ON OFF
CH SET UP
SAP ON OFF
3
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF Press SP/EP.
+/–/ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP ON OFF
4
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
On the VCR, press REC. Or on the
ON OFF
+/–/ENTER/MENU
Remote, while holding REC, press
PLAY (
The REC indicator will light.
During recording
Pause recording
Press PAUSE.
• Press PAUSE to resume recording.
• You can select channel in the
Stop recording
Press STOP (
Remote.
Load a cassette
Select recording channel
Set tape speed
Start recording
).
recording pause mode.
) on the
Record safety tab
CH 001
00 : 00 : 00 SP
CH 110
OR Press STOP/EJECT
( / ) on the VCR.