Using The Confirmation Display; Storing Channels Manually - JVC HR-A230EK Instructions Manual

26
1
4
NUMBER
7
PUSH JOG

USING THE CONFIRMATION DISPLAY

q
6
STORE
2
2 3
5 6
8 9
0
OK

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.
ACCESS CH. SET DISPLAY
1
Press and hold CH SET for more than 2 seconds.
"AUTO" appears on the front display panel.
ACCESS CONFIRMATION
DISPLAY
2
Press PUSH JOG % fi to select "MANU"(AL), then press
OK. The Confirmation display appears.
SELECT POSITION
3
Press PUSH JOG % fi is until an open position in which
you want to store a channel is displayed, then press
OK. The Manual Ch. Set display appears.
Preset Position
Channel
≠
≠
INPUT CHANNEL
4
The channel number "21" appears blinking.
Press the NUMBER keys to input the channel number
you want to store.
For fine tuning adjustment, press PUSH JOG
until the channel number blinks, then press PUSH
JOG % fi. While tuning, " – ", "–" or " – " appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK or STORE, and the Confirmation display
appears.
Repeat steps 3 through 5 as necessary.
RETURN TO NORMAL
DISPLAY
6
Press CH SET.
To input the station name, see page 28.
To change positions, see "Change Station Preset
Position" ( pg. 27).