Engine Oil Change - KYMCO SPIKE 125 Manual

Spike 125
Table of Contents

Advertisement

(6) ENGINE OIL CHANGE

1.Place the motorcycle on its main stand on level ground.
2.Remove the oil dipstick.
3.Remove the drain bolt to drain the oil.
4.Refill fresh engine oil for 0.9 liter. Firmly tighten the oil
dipstick.
5.Warm up the engine and check the oil level again after the
engine is stopped for 20 30 seconds.
¡
Specified Oil: SAE20W50
¡
API service classification: SF
¡
Capacity/Exchanging Capacity:1.0L/0.9L
CAUTION:
When changing the engine oil, also clean the oil strainer
and reinstall it.
Use the specified engine oil.
Change engine oil at first 300km and then change it at
every 2000km.
Engine oil will deteriorate easily and require more frequent
change if the motorcycle is often ridden in dusty and cold
areas or ridden for short distance.
Do not mix engine oil of different classes or viscosities. It
may cause damage to engine.
¡
- -
33
OIL
OIL
0.9L
0.9L
Drain bolt
Drain bolt

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents