Advertisement
11. Press the STOP button and exit the adjustment mode.
12. Turn off the power and remove the lead wire between the IC10-
pin 67 (TP77) and GND (TP74). This ends the adjustment mode.
19. Replacement Parts List
Notes:
- Important safety notice:
Components identified by
important for safety.
Furthermore, special parts which have purposes of fire-retardant
(resistors), high-quality sound (capacitors), low-noise (resistors),
etc. are used.
When replacing any of components, be sure to use only
manufacture's specified parts shown in the parts list.
- The marking [RTL] indicates that Retention Time is Limited for this
item. After the discontinuation of this assembly in production, the
item will continue to be available for a specific period of time. The
retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing part and
product retention. After the end of this period, the assembly will
no longer be available.
- All parts are supplied by MESA.
mark have special characteristics
37
Advertisement
