Ricoh G112 Service Manual page 79

Rev. 10/27/2009
Code Description
870 Address book error
G112
An error is detected in the data
G116
copied to the address book over
Only
a network.
900 Controller counter error
920 Printer error 1
G091
An internal application error was
Only
detected and operation cannot
continue.
920 Printer application error
G094
An error is detected in the printer
G112
application program.
G116
Only
921 Printer font error
G112
A necessary font is not found in
G116
the SD card.
Only
955 FGATE error
The IPU does not respond with
the settings required to start
memory image processing.
990 Software performance error
Undefined error
992
G112
G116
Only
998 Application start error
SM
CÓPIA NÃO CONTROLADA
• Defective software program.
• Defective HDD.
• Incorrect path to the server.
1. Initialize the address book data.
2. Initialize the user information.
3. Replace the HDD.
• Replace the NVRAM if the error is frequent.
• Software defective; turn the machine off/on,
or change the controller firmware
• Insufficient memory
• Defective software
•
Unexpected hardware resource (e.g.,
memory shortage)
1. Software defective; switch off/on, or change
the controller firmware if the problem is not
solved
2. Install an optional memory.
• A necessary font is not found in the SD card.
• The SD card data is corrupted.
• Check that the SD card has the correct data.
• Software bug; reboot the machine
• Internal parameter incorrect
• Insufficient working memory
• Software defective; reboot the machine
• Internal parameter incorrect
• Insufficient working memory
• When this SC occurs, the file name, address,
and data will be stored in NVRAM.
Note the above data and the situation in which
this SC occurs. Then report the data and
conditions to your technical control center.
• Defective software program
• An error undetectable by any other SC code
occurred
• Software defective; change the firmware for
the application that failed
• An option required by the application (RAM,
DIMM, board) is not installed
4-7
CÓPIA NÃO CONTROLADA
CONTROLLER ERROR
Required Action
G112/G113/G116/G094/G095/G091