Taillight Assembly; Lean Angle Cut-Off Switch; Anti-Theft Alarm Pre-Wiring/Grip Warmer Pre-Wiring; Mobile Phone Charger Pre-Wiring - Yamaha XP500 TMax Technical Manual

TAILLIGHT ASSEMBLY

n Newly designed dual taillight
 Tail / brake light
‚ Turn signal light
ƒ License plate light : 12V, 5W
2

LEAN ANGLE CUT-OFF SWITCH

Shuts off fuel pump if TMax falls on its side with running engine
Switch can not be activated if TMax is leaned over while cornering
If activated, the main switch must be turned "off" and then back "on" again to start the engine
ANTI-THEFT ALARM PRE-WIRING
n Main wiring harness is pre-wired from factory with connectors for an aftermarket alarm system
n Location: behind left side body cover
GRIP WARMER PRE-WIRING
n Main wiring harness is pre-wired from factory with connectors for an aftermarket grip warmer
n Location: under handlebar cover

MOBILE PHONE CHARGER PRE-WIRING

n Main wiring harness is pre-wired from factory with connectors for an aftermarket mobile phone charger
n Location: behind right side body cover
XP500 TMax Technical Orientation Guide
: 12V, 21/5W
: 12V, 21W
Taillight
1
2
25
License plate light
3