Basic Operations - Clarion ProAudio DXZ63SMP Owner's Manual

- EXCITE
-CUSTOM
- Z+ OFF
Basic Operations
"Z+ OFF"
~
"BASS BOOST"
~
"IMPACT"
~
"EXCITE"
~
"CUSTOM"
~
"Z+ OFF" ...
- BASS BOOST bass emphasized
- IMPACT bass and treble empha-
sized
bass and treble empha-
sized mid de-emphasized
user custom
no sound effect
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-En-
hancer Plus mode to adjust.
2. Press the [A-M] button and turning the
[ROTARY} knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the - direction.
.When "B-BOOST 0" selected, you can ad-
just the bass in the range of -3 to 3.
• When "IMPACT 0" selected, you can adjust
the bass and treble in the range of -3 to 3.
.When "EXCITE 0" selected, you can adjust
the bass and treble in the range of -3 to 3.
., When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the "CUSTOM" mode.
Bass/treble characteristics become flat and
the indication "Z+FLAT" is shown in the dis-
play.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
.When "BASS BOOST" is set
"B-BOOST" ~ "BAL 0" ~ "FADER 0" ..
Last function mode.
.When "IMPACT" is set
"IMPACT"
~
"BAL 0"
~
"FADER 0"
~
Last
function mode.
• When "EXCITE" is set
"EXCITE" ~ "BAL 0" ~ "FADER 0" ~ Last
function mode.
• When "CUSTOM" is set
"BASS" ~ "TREBLE" ~ "BAL 0" ~ "FADER
0" ~ Last function mode.
• When "Z+ OFF" is set
"BAL 0"
~
"FADER 0"
~
Last function
mode.
Adjusting the bass (Gain,
Frequency, a-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A·M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
*
The factory default setting is "S"'GAIN O~".
(Adjustment range: -6 to +8)
3. Press the [.->] or [< ....]
button to select
"B<4FREQ 50~".
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
*
The factory default setting is "S<4FREQ 50~".
(Adjustment 50/80/120 Hz)
4. Press the
[~>]
or [< ....] button to select "B...Q
1~".
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
.,. The factory default setting is "B"'O
1~"
.
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached .
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A·M] button and select 'TREBLE".
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
"The factory default setting is "T<4GAIN O~".
(Adjustment range:
-6
to
+6)
3. Press the [.->] or [< ....] button to select
'T<4FREQ 12k~".
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
"The factory default setting is "T"'FREQ 12k~".
(Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
I
DXZ635MP
13