Using The Remote Control - JVC XU-301BK Instructions Manual

Using the Remote Control

Installing the dry batteries ———————————————————————————
1 Slide open the cover.
Remote control operations ———————————————————————————
The remote control has two sets of control panels: the regular control panel on the unit's exterior, and the editing control panel which is
revealed when the exterior panel is opened out. The regular controls are used mainly for playing CDs and MDs and for recording MDs, and
the editing controls are used mainly when editing and inputting titles.
Regular control
panel
When the regular controls are used
XU-301 MD-CD COMBINATION DECK
3
CD
2
CD
3 - CD
1
CD PLAY & EXCHANGE
STANDBY TIMER CD PITCH CONTROL
/CLOCK 1st TRACK LISTENING
BEC EDIT
POWER
NORMAL SPEED
CD REC SKIP
SAMPLING RATE CONVERTER
8
2 Install the dry batteries
(Size "AAA", R03 or UM4 x 2).
DIGITAL INPUT DISPLAY
32kHz 44.1kHz 48kHz EDIT TITLE /CHARA PLAY MODE
MIXING CANCEL SET
REC REC REC
DIGITAL CD LINE MIC
PAUSE START STOP
REC SOURCE SELECTOR
MIX BALANCE REC LEVEL
CD
MD
LINE CD MIN MAX
MIC LINE
MIC PHONES
How to use the remote control correctly —————————
• Point the remote control correctly at the remote control sensor on the main unit, and press the buttons.
• The remote control can be operated at a distance of up to 7 meters or so from the remote control
sensor. This distance will be less if the remote control is operated from a position which is not
directly in front or on the same level as the main unit.
When the distance over which the remote control can be operated starts to drop, it means that the
batteries are nearing the end of their service life.
Replace both batteries (size "AAA", R03 or UM4 alkaline batteries) with fresh units.
The dry batteries provided with the unit are for operational check purposes. Replace them with fresh
units at the earliest opportunity.
3 Slide the cover back
• Align the polarities with the
markings inside the battery
compartment of the remote
control, and install.
When the editing controls are used
3
CD
2
CD
1
CD
STANDBY
POWER
into position.
Editing control panel
XU-301 MD-CD COMBINATION DECK
3 CD
-
PLAY & EXCHANGE
TIMER CD PITCH CONTROL
/CLOCK 1st TRACK LISTENING
BEC EDIT
NORMAL SPEED
CD REC SKIP
SAMPLING RATE CONVERTER
• To input titles, the remote control
can be operated sideways. Refer
to page 10 for the names of the
buttons.