Advertisement
Broadband Setup Netgear DM11PSP
Setting Started
Getting Started (Cont.)
Requirements
1. Any operating system is compatible however, depending on the version this may affect
your internet experience.
2. Internet Explorer 6.0 or higher/Firefox 2.0 or higher.
3. Ethernet network adapter.
Connecting the DM111PSP to your computer
1. Connect your network cable to the yellow port located at the back of the modem, and
the other end will connect to your computer.
2. Connect a telephone cable to the grey port at the back of the modem, and connect the
other end to your telephone wall socket.
3. Finally, connect the power cable to your modem and the power adapter to your power
point. Press the power button to the "ON" state.
The diagram below shows how the modem connects physically to your phone line,
computer and power point.
4. Now that the modem is connected to your computer, phone line and powered on, you
need to ensure that the lights on the modem indicate the following:
Label
Action
Power
Solid Green
Ethernet
Solid or Blinking Green
DSL
Solid Green
Internet
Off
Telephone
socket
Computer
Power point
Advertisement
