Show Poi On Map; Switch Map; Planning Settings - TomTom MyTomTom User Manual

Show POI on map

Tap this button to select the types of Point of Interest (POI) you want to
see on the map.
1. Tap Show POI on map in the Settings menu.
Show POI on
map
2. Select the POI categories you want to be shown on the map.
Tap Search and use the keyboard to search for a category name.
3. Select whether you want POIs to be shown in 2D or 3D views of the
map.
4. Tap Done.
Point of Interest locations are shown on the map as symbols.

Switch map

Tap this button to select the map you want to use for route planning and
navigation.
Although you can store more than one map on the device, you can only
Switch map
use one map at a time for planning and navigation.
To switch from the current map to plan a route in another country or
region, simply change this setting.
Note: When you first select a new map, you may need to connect to
your MyTomTom account and activate the map.

Planning settings

Tap this button to set the way your TomTom PRO calculates the routes
that you plan.
Set the type of route you want your PRO to calculate.
Planning
settings
Tap IQ Routes to set if you want the device to use IQ Routes information
to help find the best route.
Set whether you want your TomTom PRO to replan the current route if a
faster route is found while you are driving. This is useful if traffic builds
up or clears, further ahead on your route.
Set whether you want to be warned if your route passes through an
area where your map contains only limited information.
Set how your PRO should manage toll roads and ferry crossings when
the device calculates a route.
Set whether you want the route summary screen to close automatically
after you plan a route. If you select No, then you will need to tap Done
to close the route summary screen every time you plan a route.
60