Front Panel Controls; Front View - Hitachi 50HDT50M Service Manual

FRONT PANEL CONTROLS

AUDIO VIDEO
CONTROL
CENTER
MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This
button also serves as the SELECT button when in MENU mode.
INPUT/EXIT button
Press this button to select the desired input, VIDEO 1 to 5, RGB, or Ant A/B source. Your selection is shown in the top right corner
of the screen. This button also serves as the EXIT button when in MENU mode.
NOTES: Your remote control does not have an INPUT button. To change to video inputs, press VID1~VID5 buttons depending
on the input you wish to switch to. Press TV/RGB button on the remote control to toggle between TV and RGB
(ANALOG INPUT).
CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as
the cursor down ( ) and up ( ) buttons when in MENU mode.
VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as
the cursor left ( ) and right ( ) buttons when in MENU mode.
VOL- VOL+ CH- CH+
POWER
STANDBY (RED) ON (GREEN)

FRONT VIEW

50"
DISPLAY
MONITOR
STANDBY (RED) ON (GREEN)
AUDIO VIDEO CONTROL CENTER
INPUT/EXIT
PHONES
16
50M Bluish Black
55M Bright Silver
PULL
INPUT 5
MENU/SELECT
L/(MONO) R
S-VIDEO VIDEO
AUDIO
PT3-H AVC3-U