Canon DC330 Instruction Manual page 55

I
To
RUN THROUGH THE STill IMAGES
Ht
Push the joystick (.... ~ ) and hold it
pressed down to run quickly through
the still images.
To
SKIP
10
OR
100
STill IMAGES
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
·~/O
switch or the operating mode.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or transferred from a
computer.
- Images whose file names have been
changed.
Slideshow
[FUNC.]
€)
[~)
SLiDESHOW] €) [START]
• Images are played back one after
another.
• Press [--=FU~N--C-CC~.] to stop the slideshow.
Index Screen
1 If the joystick guide does not
appear on screen, press
W
to
display it.
2 Push the joystick
(~)
toward
!C.
FUNC.
(OJ
23)
FUNC.
o
3 Select (~T) [~ JUMP 10 IMAGES]
or [r.= JUMP 100 IMAGES].
4 Jump ( .... ~ ) the number of images
selected and press
®.
You can press
00
again to hide the
joystick guide.
o
IMPORTANT
• Observe the following precautions while
the card access display
(~Od)
appears
on screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not sUbject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot
cover and do not remove the memory
card.
1
Move the zoom lever toward W.
The still images index screen
appears.
2
Select
(~T,
....
~)
an image.
I
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the
zoom lever toward W to extend the
green selection frame to the whole
page, and move (....
~
) between
index pages. Move the zoom lever
toward
T
to return to moving
between single images.
3
Press
@.
The index screen closes and the
selected image is displayed.
Photos • 55