Table of Contents
Advertisement
2 Connect the supplied AM loop antenna to the
AM LOOP terminal.
Place the antenna away from the unit and adjust its
position for the best reception.
1
3
3 Adjust the position of the FM antenna for the
best reception.
4 Set the voltage selector to the local power line
voltage.
5 Connect the AC power cord of the unit to the
AC outlet after all other connections have
been made.
To remove the speaker grilles
The speaker grilles can be removed as shown in the
illustration below.
Holes
To remove the speaker grille, inserting your fingers at the
top of the speaker grille, pull it towards you. Then pull the
bottom towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.
2
Projections
Speaker grille
– 7 –
Advertisement
Table of Contents
