Table of Contents
Advertisement
WarninG
1.
BeFore each uSe,
loose nuts, misalignment or binding of moving parts, cracked or broken parts,
damaged seals or nozzle, and any other condition that may affect its safe
operation.
2.
aFter uSe,
Problem
Pump is hard to
pump or does not
pressurize.
Bad spray pattern
or low spray
volume.
SKU 97411
For technical questions, please call 1-800-444-3353.
maintenance and SerVicinG
risk of serious personal injury from mishandling of chemical
compounds. use personal safety equipment when handling
chemicals. Prevent spills and exposure of persons or
animals to chemicals. damaged equipment can fail, causing
serious personal injury. do not use damaged equipment.
Any maintenance or service not specifically explained in this
manual must be performed by a qualified service technician.
cleaning, maintenance, and lubrication
inspect the general condition of the Sprayer. Check for
clean external surfaces of the sprayer with a clean cloth.
troubleshooting
Possible causes
1.
Pump O-ring is not lubricated.
2.
Pump O-ring is damaged.
1.
Nozzle is clogged.
2.
Pressure is low in Sprayer.
3.
Suction Tube Filter is clogged.
4.
Will not sustain pressure.
Probable Solutions
1.
Lubricate by applying petroleum jelly
or grease around outside of O-ring.
2.
Replace O-ring.
1.
Remove Nozzle and clean.
2.
Check Sprayer for leaks and
pressurize.
3.
Remove suction tube assembly and
clean filter.
4.
Tighten hose, nut, safety cap and
pump locking nut. Replace damaged
seals.
Page 9
Advertisement
Table of Contents
