Selecting Your Favorite Sea Mode; Creating Your Own Sea Mode - JVC RX-778VBK Instruction Manual

For Dolby Pro Logic:
"TEST TONE":
"CENTER LEVEL": Adjust the center speaker output
"REAR L LEVEL": Adjust the left rear speaker output
"REAR R LEVEL": Adjust the right rear speaker
For Dolby Digital Surround:
"TEST TONE":
"CENTER LEVEL": Adjust the center speaker output
"REAR L LEVEL": Adjust the left rear speaker output
"REAR R LEVEL": Adjust the right rear speaker
For JVC Theater Surround:
"TEST TONE":
"CENTER LEVEL": Adjust the center speaker output
"REAR L LEVEL": Adjust the left rear speaker output
"REAR R LEVEL": Adjust the right rear speaker
"DSP EFFECT":
Notes:
* Not displayed when "REAR SPK" is set to "NONE" (see page
14).
** Not displayed when "CENTER SPK" is set to "NONE" (see
page 14).
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.

Selecting Your Favorite SEA Mode

(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
CONTROL," then press @ / #.
The SOUND CONTROL menu appears.
3. Press % / fi to move
to "SEA," then press
@ / #.
The SEA menu appears.
4. Press % / fi to move
to "SEA MODE."
5. Press @ / # to select the SEA mode you want.
6. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
30
Output a test tone.
level.**
level.*
output level.*
Output a test tone.
level.**
level.*
output level.*
Output a test tone.
level.**
level.*
output level.*
Select the effect level.
to "SOUND

Creating Your Own SEA Mode

(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
CONTROL," then press @ / #.
The SOUND CONTROL menu appears.
3. Press % / fi to move
@ / #.
The SEA menu appears.
4. Press % / fi to move
to "SEA ADJUST."
The SEA ADJUST menu
appears.
5. Press % / fi / @ / # to
adjust the SEA mode as
you want.
@ / # : Select the frequency ranges.
% / fi :
Adjust the frequency levels.
6. Press SET to store the setting into the SEA
USERMODE.
• If you press EXIT, without pressing SET in this step, you can
return to the SEA menu. (The adjustment you have made is
active but not stored.)
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
to "SOUND
to "SEA," then press