Video - Toshiba DVR620KU Owner's Manual

Video

Press [STOP C] if you are playing back a disc.
1
2
3
4
5
E9PKAUD_DVR620KU_EN.indd 95 E9PKAUD_DVR620KU_EN.indd 95
Downloaded from www.Manualslib.com
GENERAL SETTING
.@/: ABC DEF
TRACKING
GHI JKL MNO
PQRS TUV WXYZ SAT.LINK
TIMER
SPACE
PROG.
SETUP SETUP DISPLAY AUDIO
DISC MENU TOP MENU
ENTER ENTER
CLEAR RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
REV PLAY FWD
SKIP STOP STOP SKIP
PAUSE
VCR DVD
DUBBING REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Press [SETUP] and use [K / L] to
select "General Setting", then press
[ENTER].
Use [K / L] to select "Video", then
press [ENTER].
Use [K / L] to select a desired item,
then press [ENTER].
1
Progressive
2
TV Aspect
3
Select Video
Submenu will appear.
Refer 1 to 2 on this page and set
the selected item.
3 ,
• For refer to "SETTINGS FOR THE VIDEO
INPUT" on page 27.
When you finish with the setting,
press [SETUP] to exit.
manuals search engine
1
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [ENTER].
Progressive
ON
OFF
2) Use [{ / B] to select "Yes", then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE :
If there is no picture or picture is
distorted after selecting "Yes",
Wait about 15 seconds for auto recovery.
Activate? Yes No
3) Use [K / L] to select "Yes" within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to pages 20-21.) If not, use the RCA video cable
and set the progressive scan to "OFF".
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The "Progressive" setting will be "OFF".
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
2
TV Aspect (Default: 16:9 Wide)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
EN EN 95 95
3/25/2009 3:49:02 PM 3/25/2009 3:49:02 PM