Battery Usage; Battery Installation; Battery Removal - Audiovox CDM-8910 Owner's Manual

HANDSET DESCRIPTION
C
Dormant
H
Indicates your phone is in a dormant state during a
data call. Your phone goes to Dormant mode
1
when you have no had any activity on a page for
some time - your connection is still active and now
you can make and receive calls.
Data Only
Receives an async. call as a voice call.
GPS Icon
Indicates the Location Service of your phone is
disabled/enabled.
1X
Phone is in the 1x service area.
Scratch Pad
Displays when scratchpad is in use during a call.
Headset
Indicates that a headset is connected.
TTY Mode
Indicates your phone is in TTY mode is active.
Phone Lock
Indicates your phone is locked.
10

BATTERY USAGE

BATTERY INSTALLATION

u
1
Place the battery on the back of the handset
v
and slide into place.
until it locks into place.
u

BATTERY REMOVAL

Push the release latch up and lift the battery
1
to remove it from the handset.
If the battery is not correctly placed in the compartment, the
handset will not turn on and/or the battery may detach during use.
11
Push the battery down
v
C
H
1