Changing The Es Date And Time - HP 800 User Manual

System Configuration
Enforcement Servers
NOTE:
NOTE:
3-16
To change the ES network settings:
Home window>>System configuration>>Enforcement clusters &
servers>>Select an ES>>Configuration
Modify any of the following Network settings you want to change:
Enter a new ES in the Host name text field. For example,
■
garp.mycompany.com
Enter a new ES address in the IP address text field. For example,
■
192.168.153.35
Enter a new netmask in the Network mask text field. For example,
■
255.255.255.0
Enter a new gateway in the Gateway IP address text field. For example
■
192.168.153.2
■ Enter one or more DNS resolver IP addresses, separated by commas,
semicolons, or spaces in the DNS IP addresses text box. For example:
10.0.16.100,10.0.1.1
The NAC 800 ESs host name must be a fully qualified domain name (FQDN).
For example, the FQDN should include the host and the domain name—
including the top-level domain.
For example, waldo.mycompany.com. Select names that are short, easy to
remember, have no spaces or underscores, and the first and last character
cannot be a dash (-).
You cannot change the ES IP address for a single-server installation. You can
change the MS IP address for a single-server installation.

Changing the ES Date and Time

To change the ES date and time:
Home window>>System configuration>>Enforcement clusters &
servers>>Select an ES>>Configuration
1. Select a Region from the Region drop-down list in the Date and time area.
Select a time zone from the Time zone drop-down list.
2.
3. Click ok.