Table of Contents
Advertisement
Quick Links
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.
Advertisement
Table of Contents
Related Manuals for Clarke ultra speed
Summary of Contents for Clarke ultra speed
- Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
- Page 2 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
-
Page 3: Table Of Contents
Section II - Parts and Service Manual Maintenance ................26 Assembly Drawing ..............30 Assembly Parts List ............31 Electrical Schematic ............... 32 Motor Drawing and Parts List ..........33 Page - 2 - Operator's Manual - Ultra Speed Burnisher Clarke ®... - Page 4 Todas las indicaciones de dirección dadas en este libro están dadas desde la posición del operador en la parte de atrás de la máquina. Puede Ud. conseguir libros suplementarios dirigiéndose a su distribuidor Clarke. Indice Instrucciones de seguridad para el operador ....... 6 Presentación de la máquina ............
- Page 5 Des versions du manuel existent en d'autres langues. Toutes les indications de direction figurant dans ce manuel sont visualisées depuis la position de l'opérateur, à l'arrière de la machine. Pour toute commande de manuels, adressez-vous à votre revendeur Clarke. INDEX Consignes de sécurité pour l'opérateur ............7 Présentation de la machine ................
-
Page 6: Operator Safety Information
WARNING: Any alterations or modifications of this machine could result in damage to the machine or injury to the operator or other bystanders. Alterations or modifications not authorized by the manufac- turer voids any and all warranties and liabilities. Operator's Manual - Ultra Speed Burnisher Page -5 - Clarke... -
Page 7: Instrucciones Para La Seguridad Del Operador
Si opera la máquina con un cable de alimentación estropeado, se puede causar una electrocución. No use nunca la máquina si el cable de alimentación está estropeado. No tire de la máquina usando el cable eléctrico. Page - 6 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 8: Consignes De Sécurité Pour L'opérateur
Vous devez avoir reçu une formation avant d'utiliser la machine. Si vous (ou les membres de votre personnel) ne connaissez pas le français, veuillez vous faire expliquer le manuel complètement avant de commencer à utiliser la machine. Operator's Manual - Ultra Speed Burnisher Page -7 - Clarke... - Page 9 Pour éviter une surcharge du moteur, ne pas utiliser la polisseuse pour un récurage à l'eau. La polisseuse n'est pas équipée d'une jupe pour retenir l'eau. Risque de projections. Page - 8 - Operator's Manual - Ultra Speed Burnisher Clarke ®...
-
Page 10: Features And Specifications
Hard finish/high traffic Buffer Wet-look hard finish 976236 UHS Aqua Burnish 1500-3000 Aqua Soft finish/low traffic Buffer Wet-look soft finish 976234 SHS Buffer Buff Dry/Spray 600-1500 Beige Glossy finish Spray Operator's Manual - Ultra Speed Burnisher Page -9 - Clarke ®... -
Page 11: Presentación De La Máquina
Buffer reflejante mate 976236 UHS Aqua Pulido en seco 1500-3000 aqua semimate/paso leve Buffer reflejante semimate 976234 SHS Buffer Taponamient o en seco/ 600-1500 beige brillante pulverización Page - 10 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 12: Présentation De La Machine
Buffer réfléchissant mat 976236 UHS Aqua Polissage à sec 1500-3000 semi-mat/peu de Buffer passage réfléchissant semi- mat 976234 SHS Buffer Tamponnage à sec/ 600-1500 beige brillant pulvérisation Operator's Manual - Ultra Speed Burnisher Page -11 - Clarke ®... -
Page 13: 120 Volt Instructions For Electrical Connection
WARNING: If you use an extension cord, use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer than 50 feet. Do not join two extension cords. Page - 12 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 14: Máquinas 120V - Instrucciones Para La Conexión Eléctrica
6 mm². N'utilisez pas más de 15 metros de largo. Nunca conecte de rallonge d'une longueur supérieure à 15 m. dos añadidos. Ne raccordez jamais deux rallonges. Operator's Manual - Ultra Speed Burnisher Page -13 - Clarke ®... -
Page 15: 240 Volt Instructions For Electrical Connection
WARNING: If you use an extension cord, use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer than 50 feet. Do not join two extension cords. Page - 14 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 16: Máquinas 240V - Instrucciones Para La Conexión Eléctrica
No use ningún añadido de de rallonge d'une longueur supérieure à 15 m. más de 15 metros de largo. Nunca conecte Ne raccordez jamais deux rallonges. dos añadidos. Operator's Manual - Ultra Speed Burnisher Page -15 - Clarke ®... -
Page 17: How To Prepare Machine For Operation
2. If the needle shows in the white area, turn the height Figure 4 adjustment knob to the left to increase the pad pressure. Page - 16 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 18: Preparación De La Máquina Para Trabajar
Operator's Manual - Ultra Speed Burnisher Page -17 - Clarke ®... -
Page 19: How To Operate The Machine
The circuit breaker reset button is near the pad pressure meter. Push the button to reset the circuit breaker. If the motor continues to stop, consult an authorized service person. Page - 18 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 20: Funcionamiento De La Máquina
Si le moteur ne volver a conectar el cortacircuito. Si el motor no fonctionne toujours pas, consulter un technicien agréé. funciona todavía, avise a un técnico autorizado. Operator's Manual - Ultra Speed Burnisher Page -19 - Clarke ®... - Page 21 Inspection and Repairs Take the machine to the nearest Clarke authorized repair location once a year for the maintenance inspections. To make any repairs, take the machine to the nearest Clarke authorized repair location.
- Page 22 Clarke. technicien agréé Clarke. AVISO: El mantenimiento y las AVERTISSEMENT: L'entretien et les reparaciones deben ser réparations doivent efectuados por técnicos être effectués par des cualificados. techniciens qualifiés. Operator's Manual - Ultra Speed Burnisher Page -21 - Clarke ®...
-
Page 23: How To Correct Problems In The Machine
Remove the pad. Install the pad correctly. excessively. correctly. Center the pad properly. The pad is worn or damaged. Install a new pad. The pad is defective. Inspect and install a new pad. Page - 22 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 24: Posibles Problemas Y Soluciones
Centre correctamente el disco. El disco es usado o dañado. Coloque un disco nuevo. El disco es defectuoso. Inspeccione el disco e instale un nuevo disco. Operator's Manual - Ultra Speed Burnisher Page -23 - Clarke ®... -
Page 25: Pannes Courantes Et Solutions
Recentrer le disque correctement. Le disque est usé ou Placer un disque neuf. endommagé. Le disque est défectueux. Inspectez et installez un nouveau disque. Page - 24 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 26: Section Ii - Parts And Service Manual
Division of ® Ultra Speed Burnisher Section II Parts and Service Manual (70452A) Operator's Manual - Ultra Speed Burnisher Page -25 - ® Clarke... -
Page 27: Maintenance
To check the commutator and the carbon brushes, follow this procedure: 1. Remove the two top screws of the motor cover. 2. Remove the cover. Page - 26 - Operator's Manual - Ultra Speed Burnisher Clarke ®... - Page 28 Vérifier que la fiche de la prise réseau est débranchée. Enlever les deux vis de fixation situées sur la face supérieure du couvercle du moteur. Operator's Manual - Ultra Speed Burnisher Page -27 - Clarke ®...
- Page 29 Keep the lead wire connected. 4. Turn the pad driver and look at the part of the commutator that the brushes touch. 5. Take the machine to a Clarke authorized repair SMALL UNEVEN location if you see any of the following conditions:...
- Page 30 à déclencher et que le moteur ne tourne pas à sa vitesse normale, il se peut que le redresseur soit endommagé. Dans ce cas, confier la machine à un centre technique agréé Clarke, où le redresseur sera remplacé. Operator's Manual - Ultra Speed Burnisher...
-
Page 31: Assembly Drawing
Ultra Speed Burnisher Clarke ® Assembly Parts List 5/03 40 43 112 69 Page - 30 - Operator's Manual - Ultra Speed Burnisher Clarke ®... -
Page 32: Assembly Parts List 5/03
Bushing, Bottom 962798 Screw, #10-24 x ½ 58684A Spring 70673A Label, Clarke 51169A Bearing 170686 Locknut NOTE: indicates a change has been made since the last publication of this manual. Operator's Manual - Ultra Speed Burnisher Page -31 - Clarke ®... -
Page 33: Electrical Schematic
Ultra Speed Burnisher Clarke ® Electrical Schematic 120 & 240 Volts 12/02 Page - 32 - Operator's Manual - Ultra Speed Burnisher ® Clarke... -
Page 34: Motor Drawing And Parts List
Varistor (240V) 55647A Yellow Lead 55648A Red Lead 831102 Strain Relief 58056A Strain Relief 52046A Commutator Bracket w/ Rectifier (#8 includes #'s 6, 7, 19, 20 and 21) MOTOR SCHEMATIC Operator's Manual - Ultra Speed Burnisher Page -33 - ® Clarke... - Page 35 NOTES...
- Page 36 ALTO Nederland B.V. Vianen (770) 973-5225 Stuartweg 4C NL-4131 NJ Vianen +31 347 324000 ® Clarke Clarke American Sanders ALTO Sverige AB, Molndal (Sweden) A.L. Cook Aminogatan 18 Customer Service Headquarters and Factory Box 4029 2100 Highway 265 S-431 04 Molndal...
- Page 37 (b). Return the product to the nearest Clarke repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. (c). Clarke will repair the product and or replace any defective parts without charge within a reasonable time after receipt of the product.