D-Link DIR-862L User Manual page 55

The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being config-
Enable Wireless: Check the box to enable the wireless func-
Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The
802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network.
Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the channel with the least
Wireless Channel: By default the channel is set to 36. The channel can be changed to fit the channel setting for an existing wireless
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.
Channel Width: When using the 802.11n frequency band, the user has an option to choose between a 20 MHz, 20/40 MHz, or
Visibility Status: The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless
D-Link DIR-862L User Manual
ured. In this option we find that the fol-
lowing parameters will be regarding the 5
GHz band.
tion. If you do not want to use wireless,
uncheck the box to disable all the wireless
functions. Select the time frame that you
would like your wireless network enabled.
The schedule may be set to Always. Any
schedule you create will be available in
the drop-down menu. Click New Schedule
to create a new schedule.
SSID is case-sensitive.
amount of interference.
network or to customize the wireless network. If you enable Auto Channel Selection, this option will be disabled.
20/40/80 MHz bandwidth.
network name is broadcasted to anyone within the range of your signal. If you are not using encryption then they
could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID)
on the client manually to connect to the network.
51