Table of Contents
Advertisement
(Continued)
Connections
Connecting the Speakers
Speaker cord
Speaker cord
Red
Black
Right speaker (rear view)
CAUTION
• Do not short-circuit the
nals. Doing so may damage the speakers.
• Do not connect other speakers together with the
supplied speakers. The change in impedance
may damage the main unit and the speakers.
• The speakers of this product are magnetically
shielded, but color irregularities may occur on the
TV depending on how the speakers are installed.
Keep in mind the following.
1. Turn off the main power of your TV before
installing the speakers. Wait for about 30 min-
utes before turning on the TV again.
2. If color irregularity occurs in pictures, keep a
distance of more than 10 cm between the TV
and the speakers.
13
Connect all necessary parts before connecting the power plug.
Main unit (rear view)
and
speaker termi-
After connecting the speakers, gently pull on the
speaker cords to make sure the cords are firmly
connected and do not pull out.
Red
Black
You can detach the speaker cover.
NOTE
• Improper speaker cord connection spoils the stereo
effect and sound quality.
• The impedance of speakers connected to this
product must be within the range of 4 Ω to 16 Ω.
• Cooling fan is built into the main unit for emitting
generated heat. The internal cooling fan auto-
matically rotates and stops. To ensure sufficient
cooling, leave a space of more than 1 cm
between the main unit and the speakers or other
objects.
Introduction
Speaker cord
Left speaker (rear view)
Speaker
cover
Advertisement
Table of Contents
