Gigabyte GA-M61PME-S2 User Manual page 41

USB Resume from Suspend
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the
installed USB device. (Default: Enabled)
Power-On by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
in a month.
Note: When using this function, avoid inadequate shutdown from the operating system or removal
of the AC power, or the settings may not be effective.
HPET Support
Enables or disables High Precision Event Timer (HPET) for Windows
(Default: Enabled)
HPET Mode
Allows you to select the HPET mode for your Windows
mode when you install 32-bit Windows
Windows
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the 5VSB lead.
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: you need an ATX power supply providing at least 1A on the 5VSB lead.
KB Power ON Password
Set the password when Power On by Keyboard is set to Password. Press <Enter> on this item
and set a password with up to 5 characters and then press <Enter> to accept. To turn on the
system, enter the password and press <Enter>.
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press
<Enter> again without entering the password to clear the password settings.
AC Back Function
Determines the state of the system after the return of power from an AC power loss.
(Note) Supported on Windows
Downloaded from www.Manualslib.com
Day of Month Alarm: Turn on the system at a specific time on each day or on a specific day
Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically.
(Note)
(Note)
Vista . (Default: 32-bit mode)
® ®
Disabled Disables this function. (Default)
Double Click Double click on left button on the PS/2 mouse to turn on the system.
Disabled Disables this function. (Default)
Password Set a password with 1~5 characters to turn on the system.
Any KEY Press any key on the keyboard to turn on the system.
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.
Soft-Off The system stays off upon the return of the AC power. (Default)
Full-On The system is turned on upon the return of the AC power.
Vista
®
manuals search engine
Vista
®
Vista ; select 64-bit mode when you install 64-bit
® ®
operating system only.
®
- 41 -
Vista operating system.
® ®
operating system. Select 32-bit
®
BIOS Setup