Cooling-Fan Assembly (Optional); Removing The Cooling-Fan Assembly (Optional) - Dell PowerEdge T630 Owner's Manual

Steps
1. Align the plug at the base of the cooling fan with the connector on the system board.
2. Slide the cooling fan into the securing slots until the plug locks into place.
Next steps
Follow the procedure listed in

Cooling-fan assembly (optional)

Removing the cooling-fan assembly (optional)

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Unlock the cooling-fan assembly from the chassis by lifting the release levers up.
2. Lift the cooling-fan assembly out of the chassis.
Figure 15. Removing and installing the cooling-fan assembly
1. cooling-fan assembly
58
After working inside your
Safety instructions.
Before working inside your
system.
system.
2. cooling fan (4)