Ddc Key In Procedure - ViewSonic VX2413wm-2 Service Manual

Click "Auto",then the update will begin.Wait for a moment until the bar is 100%,the program windows will show
"Programing Success".This means the update is successful.

5.3 DDC Key in Procedure

Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the LCD TV, you have to do the DDC key in.
5.3.1 Equipment Needed
- VX2413wm-2
- PC (Personal computer)
- LPT cable
- 12V DC
- Firmware upgrade program
- DDC Card
5.3.2 Install software
You must install the
Note:
After installation, you must restart the PC to take the setup to effect.
at the first.
26