Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for JVC GVT0142-001A
Summary of Contents for JVC GVT0142-001A
- Page 1 Consists of CA-FSY1 and SP-FSY1 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. GVT0142-001A...
- Page 2 Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — STANDBY/ON Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off).
-
Page 3: Table Of Contents
Table of contents Introduction About discs...3 Description of parts ...5 Getting started Using the remote control ...6 Putting the batteries in the remote control ... 6 Operating the TV using the remote control... 7 Connecting up ...8 Basic operations Playing discs ...12 Playback ... -
Page 4: Special Cautions
Special cautions Notes on handling 7 Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C (between 41°F and 95°F). • Leave sufficient distance between the system and the •... -
Page 5: Introduction
About discs Playable disc types This system has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This system can also play back the following discs: • Finalized DVD-R/-RW discs recorded in the DVD VIDEO format. -
Page 6: Disc Structure
About discs (continued) Notes on all files • The system can only recognize and play files with one of the following extensions, which can be in any combination of upper and lower case; MP3: “.MP3”, “.mp3” • WMA: “.WMA” , “.wma” •... -
Page 7: Description Of Parts
Description of parts The numbers represent the page numbers. Front panel See “Display window” below. In the door PHONES * Connect headphones (not supplied) with a stereo mini plug. If the headphones are connected, the speakers and subwoofer will not produce any sound. Display window S V C DV D - A RESUME... -
Page 8: Using The Remote Control
Using the remote control The numbers represent the page numbers. 15, 17 15, 32 19, 28 34, 35 Putting the batteries in the remote control 13, 16 7, 13, 14, 16 15, 32 12, 17 25, 26 7, 15 If the range or effectiveness of the remote control decreases, replace the batteries. -
Page 9: Operating The Tv Using The Remote Control
This page is for when operating your TV using the remote control of this product. Operating the TV using the remote control Setting the manufacturer's code Slide the remote control mode selector to the TV side. Keep pressing down NOTE Keep pressing down TV until Step 4 is complete. -
Page 10: Connecting Up
Connecting up Connecting antennas Connecting AM loop antenna (supplied) Set up the AM loop antenna. Connect antenna cords. Main unit How to insert antenna cords (rear panel) LOOP Connect two antenna cords as described above. If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off and remove. -
Page 11: Connecting Speakers
Connecting up Connecting speakers There is no difference between the left and right speakers. Speaker terminal Speaker cord Speaker cord (supplied) SPEAKERS Without black line With black line Main unit (rear panel) Right speaker (rear panel) CAUTION • DO NOT connect more than one speaker to one speaker terminal. -
Page 12: Connecting Other Devices
Connecting up (continued) Connecting other devices This page is for when connecting the main unit with other devices. Connecting subwoofer With an amplifier-built in subwoofer (not supplied), you can enjoy a more dynamic bass sound. Refer to the manual of the subwoofer for details. Amplifier-built-in subwoofer (not supplied) Connecting with other audio device... -
Page 13: Connecting With Tv
Connecting up Connecting with TV Supplied composite video cord Main unit COMPONENT VIDEO S-VIDEO VIDEO OUT CAUTION Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing. -
Page 14: Playing Discs
Playing discs Playback • The power will be turned on when any of PLAY 3, FM, AM, AUX, or 0 on the main unit and , FM, AM, AUX, or 0OPEN/CLOSE DVD/CD on the remote control is pressed while the power is off. -
Page 15: To Switch The Display
Display window during disc playback Ex.: When a DVD VIDEO is played S V C DV D Disc type Elapsed playing time Chapter number Ex.: When a DVD AUDIO is played S V C DV D - A Track number If “BONUS”... -
Page 16: Select What You Want To Play By Using The Number Buttons
Playing discs (continued) Select what you want to play by using the number buttons NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • For a VCD or SVCD, this operation can be carried out when the disc is stopped, or during playback without the PBC function. -
Page 17: Playing Back From A Position 10 Seconds
Playing back from a position 10 seconds before (One Touch Replay) Press during playback. NOTE • This operation may not be carried out for some discs. • It is not possible to go back to the previous title. Slow Motion Playback Press SLOW or SLOW pause. -
Page 18: To Change The Brightness Of The Display Window (Dimmer)
Playing discs (continued) To change the brightness of the display window (DIMMER) Press DIMMER repeatedly. • Each time you press the button, the dimmer mode changes as follows: AUTO DIMMER: During the video source playback, the display window dims and the illumination automatically turns off. - Page 19 Playback Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read “track” as “file”. NOTE When playing a disc containing both MP3/WMA and JPEG files, set one of them to be played (page 29). Load a disc.
-
Page 20: Resume Playback
Resume Playback NOTE Set the remote control mode selector to AUDIO before using the number buttons. This system can store the stop point, and when you start playback again by pressing DVD/CD (even while on standby), it starts from the position where you have stopped—Resume Play. -
Page 21: Select The Scene To Be Played
Select the scene to be played NOTE Set the remote control mode selector to AUDIO before using the number buttons. Select the scene from the menu Press MENU or TOP MENU while the disc is stopped or during playback • The disc menu screen will be displayed. •... -
Page 22: Program Playback/Random Playback
Program Playback/Random Playback NOTE Set the remote control mode selector to AUDIO before using the number buttons. Play the disc in the desired order (Program Playback) It is possible to program a maximum of 99 chapters or tracks. The same chapter or track can be programmed more than once. -
Page 23: Random Playback
To program on the display window on the main unit, operate as follows: (1) Select a title/group using the number buttons. (2) Designate a chapter/track number using the number buttons. • Refer to “How to use the number buttons” (page 15). •... -
Page 24: Repeat Playback
Repeat Playback Refer to page 17 for Repeat Playback of MP3 and JPEG files. Playing the title/chapter/ group/track/all tracks repeatedly (REPEAT) Press REPEAT during playback. • Each time you press the button, the Repeat mode and its indication change as follows: For DVD VIDEO Repeat items On the TV... - Page 25 Playing the designated part repeatedly (A-B Repeat Playback) Press ON SCREEN twice during playback. The menu bar (page 28) will be displayed. Press cursor to select Press ENTER. ∞ Press cursor to display Other Repeat modes can be selected here. For other Repeat modes, refer to “Playing the title/chapter/group/track/all tracks repeatedly (REPEAT)”...
-
Page 26: Other Convenient Functions
Other convenient functions Selecting the subtitles (only for moving image) Press SUBTITLE during playback of a disc containing subtitles in several languages. Ex.: • Each time you press the button, the subtitle will be alternated between ON and OFF. Press cursor subtitle language. -
Page 27: Enlarging The Picture (Zoom)
Enlarging the picture (ZOOM) (only for moving image) Press ZOOM during playback or while paused. • Each time you press the button, the picture magnification will be changed. • (For a JPEG) You cannot change the picture magnification during slide-show playback. -
Page 28: Creating Realistic Sound (3D Phonic)
Other convenient functions (continued) Creating realistic sound (3D PHONIC) The two speakers produce an effect resembling surround-sound. Press 3D PHONIC during playback. Ex.: 3D PHONIC • Each time you press the button, the 3D PHONIC will be alternated as follows: ACTION : Suitable for action movies, sport programs or other lively... -
Page 29: Functions Specific To Dvd Audio
Functions specific to DVD AUDIO NOTE Set the remote control mode selector to AUDIO before using the number buttons. Advanced operations Playing the Bonus Group There are some DVD AUDIO discs with a special group, called “Bonus Group”, recorded. NOTE This operation can be carried out when “BONUS”... -
Page 30: Using The Menu Bar
Using the menu bar NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • This operation can be carried out when there is a disc loaded. There are some functions that may not work while the disc is stopped. Press ON SCREEN twice. -
Page 31: Preferences
Preferences NOTE The playback status mark has the same meaning of the mark on the On-screen guide (page 15). The initial settings of the system can be changed according to the environment the system is used NOTE • Set the remote control mode selector to AUDIO before using the number buttons. - Page 32 Preferences (continued) AUDIO Items Contents ( DIGITAL Select an output signal type from the AUDIO following in accordance with the device OUTPUT connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Device corresponding only to linear PCM.
-
Page 33: Country/Area Codes
Country/Area codes Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan... -
Page 34: Listening To A Radio Broadcast
Listening to a radio broadcast NOTE • Set the remote control mode selector to AUDIO before using the number buttons. You can tune in to FM or AM. Selecting a station Press FM or AM. Press ¢/4 to select the station (frequency). -
Page 35: Tuning In To A Preset Station
Tuning in to a preset station Presetting stations in the system allows you to easily tune in to a station. NOTE Set the remote control mode selector to AUDIO before using the number buttons. Presetting stations The system stores up to 30 FM stations and up to 15 AM stations. -
Page 36: Listening To The Sound Of Other Audio Device
Listening to the sound of other audio device Connect the other audio device to this system in advance (page 10). Press AUX. The source changes to AUX. Play the other audio device. For details, refer to the manual of the device connected. -
Page 37: Auto Standby
Setting the Various Timer (continued) How the daily timer works Once the daily timer has been set, the timer indicator and timer number indicator (1/2/3) are lit on the display window. Daily timer turns on the system at the same time everyday until the timer setting is canceled manually or another daily timer is activated. -
Page 38: Sleep Timer
Setting the Various Timer (continued) Sleep Timer When the time you specify elapses, the system will be turned off by itself. Press SLEEP. Each time you press the button, the time indicated on the display window on the main unit changes (in minutes). -
Page 39: Reference
Troubleshooting When you encounter a problem that seems to be a fault, check the following points before contacting your JVC service center: Power source 7 Power does not come on. • The power cord is not connected to the main unit or an AC outlet. -
Page 40: Language Codes
Troubleshooting (continued) Others 7 It is not possible to switch audio or subtitles between languages. • The disc does not contain 2 or more languages. → If only a single language is recorded on the disc, switching to another language is impossible (page 24). -
Page 41: Specifications
Specifications General Power source: AC 120 V Power consumption: 25 W (in operation) 1.0 W (on standby) Weight: 2.7 kg (6.0 lbs) External dimensions 150 mm x 152 mm x 246 mm 6 in. (W x H x D): DVD player Playable discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD, CD-R/RW (CD, VCD, MP3, WMA, JPEG format), DVD-R/-... - Page 43 BT-51005-9 (0904)
- Page 44 2005 Victor Company of Japan, Limited 0205AIMMWJEM...
- Page 45 COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT FS-Y1 —Consists of CA-FSY1 and SP-FSY1 —Composé CA-FSY1 et SP-FSY1 INSTRUCTIONS MANUEL D’INSTRUCTIONS GVT0142-002A...
- Page 46 Warnings, cautions and others/ Mises en garde, précautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.: 1.
- Page 48 For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
- Page 49 Table of contents Introduction About discs...3 Description of parts ...5 Getting started Using the remote control ...6 Putting the batteries in the remote control ... 6 Operating the TV using the remote control... 7 Connecting up ...8 Basic operations Playing discs ...12 Playback ...
- Page 50 Special cautions Notes on handling 7 Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the •...
-
Page 51: Introduction
About discs Playable disc types This system has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This system can also play back the following discs: • Finalized DVD-R/-RW discs recorded in the DVD VIDEO format. - Page 52 About discs (continued) Notes on all files • The system can only recognize and play files with one of the following extensions, which can be in any combination of upper and lower case; MP3: “.MP3”, “.mp3” • WMA: “.WMA” , “.wma” •...
-
Page 53: Description Of Parts
Description of parts The numbers represent the page numbers. Front panel See “Display window” below. In the door PHONES * Connect headphones (not supplied) with a stereo mini plug. If the headphones are connected, the speakers and subwoofer will not produce any sound. Display window S V C DV D - A RESUME... -
Page 54: Using The Remote Control
Using the remote control The numbers represent the page numbers. 15, 17 15, 32 19, 28 34, 35 Putting the batteries in the remote control 13, 16 7, 13, 14, 16 15, 32 12, 17 25, 26 7, 15 If the range or effectiveness of the remote control decreases, replace the batteries. -
Page 55: Operating The Tv Using The Remote Control
This page is for when operating your TV using the remote control of this product. Operating the TV using the remote control Setting the manufacturer's code Slide the remote control mode selector to the TV side. Keep pressing down NOTE Keep pressing down TV until Step 4 is complete. -
Page 56: Connecting Up
Connecting up Connecting antennas Connecting AM loop antenna (supplied) Set up the AM loop antenna. Connect antenna cords. Main unit How to insert antenna cords (rear panel) LOOP Connect two antenna cords as described above. If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off and remove. - Page 57 Connecting up Connecting speakers There is no difference between the left and right speakers. Speaker terminal Speaker cord Speaker cord (supplied) SPEAKERS Without black line With black line Main unit (rear panel) Right speaker (rear panel) CAUTION • DO NOT connect more than one speaker to one speaker terminal.
- Page 58 Connecting up (continued) Connecting other devices This page is for when connecting the main unit with other devices. Connecting subwoofer With an amplifier-built in subwoofer (not supplied), you can enjoy a more dynamic bass sound. Refer to the manual of the subwoofer for details. Amplifier-built-in subwoofer (not supplied) Connecting with other audio device...
- Page 59 Connecting up Connecting with TV Supplied composite video cord Main unit COMPONENT VIDEO S-VIDEO VIDEO OUT CAUTION Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing.
-
Page 60: Playing Discs
Playing discs Playback • The power will be turned on when any of PLAY 3, FM, AM, AUX, or 0 on the main unit , FM, AM, AUX, or 0OPEN/ and DVD/CD CLOSE on the remote control is pressed while the power is off. -
Page 61: To Switch The Display
Display window during disc playback Ex.: When a DVD VIDEO is played S V C DV D Disc type Elapsed playing time Chapter number Ex.: When a DVD AUDIO is played S V C DV D - A Track number If “BONUS”... -
Page 62: Select What You Want To Play By Using The Number Buttons
Playing discs (continued) Select what you want to play by using the number buttons NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • For a VCD or SVCD, this operation can be carried out when the disc is stopped, or during playback without the PBC function. -
Page 63: Slow Motion Playback
Playing back from a position 10 seconds before (One Touch Replay) Press during playback. NOTE • This operation may not be carried out for some discs. • It is not possible to go back to the previous title. Slow Motion Playback Press SLOW or SLOW pause. -
Page 64: To Change The Brightness Of The Display Window (Dimmer)
Playing discs (continued) To change the brightness of the display window (DIMMER) Press DIMMER repeatedly. • Each time you press the button, the dimmer mode changes as follows: AUTO DIMMER: During the video source playback, the display window dims and the illumination automatically turns off. - Page 65 Playback Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read “track” as “file”. NOTE When playing a disc containing both MP3/WMA and JPEG files, set one of them to be played (page 29). Load a disc.
-
Page 66: Resume Playback
Resume Playback NOTE Set the remote control mode selector to AUDIO before using the number buttons. This system can store the stop point, and when you start playback again by pressing DVD/CD (even while on standby), it starts from the position where you have stopped—Resume Play. -
Page 67: Select The Scene To Be Played
Select the scene to be played NOTE Set the remote control mode selector to AUDIO before using the number buttons. Select the scene from the menu Press MENU or TOP MENU while the disc is stopped or during playback • The disc menu screen will be displayed. •... -
Page 68: Program Playback/Random Playback
Program Playback/Random Playback NOTE Set the remote control mode selector to AUDIO before using the number buttons. Play the disc in the desired order (Program Playback) It is possible to program a maximum of 99 chapters or tracks. The same chapter or track can be programmed more than once. - Page 69 To program on the display window on the main unit, operate as follows: (1) Select a title/group using the number buttons. (2) Designate a chapter/track number using the number buttons. • Refer to “How to use the number buttons” (page 15). •...
-
Page 70: Repeat Playback
Repeat Playback Refer to page 17 for Repeat Playback of MP3 and JPEG files. Playing the title/chapter/ group/track/all tracks repeatedly (REPEAT) Press REPEAT during playback. • Each time you press the button, the Repeat mode and its indication change as follows: For DVD VIDEO Repeat items On the TV... - Page 71 Playing the designated part repeatedly (A-B Repeat Playback) Press ON SCREEN twice during playback. The menu bar (page 28) will be displayed. Press cursor to select Press ENTER. ∞ Press cursor to display Other Repeat modes can be selected here. For other Repeat modes, refer to “Playing the title/chapter/group/track/all tracks repeatedly (REPEAT)”...
-
Page 72: Other Convenient Functions
Other convenient functions Selecting the subtitles (only for moving image) Press SUBTITLE during playback of a disc containing subtitles in several languages. Ex.: • Each time you press the button, the subtitle will be alternated between ON and OFF. Press cursor subtitle language. -
Page 73: Enlarging The Picture (Zoom)
Enlarging the picture (ZOOM) (only for moving image) Press ZOOM during playback or while paused. • Each time you press the button, the picture magnification will be changed. • (For a JPEG) You cannot change the picture magnification during slide-show playback. -
Page 74: Creating Realistic Sound (3D Phonic)
Other convenient functions (continued) Creating realistic sound (3D PHONIC) The two speakers produce an effect resembling surround-sound. Press 3D PHONIC during playback. Ex.: 3D PHONIC • Each time you press the button, the 3D PHONIC will be alternated as follows: ACTION : Suitable for action movies, sport programs or other lively... -
Page 75: Functions Specific To Dvd Audio
Functions specific to DVD AUDIO NOTE Set the remote control mode selector to AUDIO before using the number buttons. Advanced operations Playing the Bonus Group There are some DVD AUDIO discs with a special group, called “Bonus Group”, recorded. NOTE This operation can be carried out when “BONUS”... -
Page 76: Using The Menu Bar
Using the menu bar NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • This operation can be carried out when there is a disc loaded. There are some functions that may not work while the disc is stopped. Press ON SCREEN twice. -
Page 77: Preferences
Preferences NOTE The playback status mark has the same meaning of the mark on the On-screen guide (page 15). The initial settings of the system can be changed according to the environment the system is used NOTE • Set the remote control mode selector to AUDIO before using the number buttons. - Page 78 Preferences (continued) AUDIO Items Contents ( DIGITAL Select an output signal type from the AUDIO following in accordance with the device OUTPUT connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Device corresponding only to linear PCM.
-
Page 79: Country/Area Codes
Country/Area codes Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan... -
Page 80: Listening To A Radio Broadcast
Listening to a radio broadcast NOTE • Set the remote control mode selector to AUDIO before using the number buttons. You can tune in to FM or AM. Selecting a station Press FM or AM. Press ¢/4 to select the station (frequency). -
Page 81: Tuning In To A Preset Station
Tuning in to a preset station Presetting stations in the system allows you to easily tune in to a station. NOTE Set the remote control mode selector to AUDIO before using the number buttons. Presetting stations The system stores up to 30 FM stations and up to 15 AM stations. -
Page 82: Listening To The Sound Of Other Audio Device
Listening to the sound of other audio device Connect the other audio device to this system in advance (page 10). Press AUX. The source changes to AUX. Play the other audio device. For details, refer to the manual of the device connected. -
Page 83: Auto Standby
Setting the Various Timer (continued) How the daily timer works Once the daily timer has been set, the timer indicator and timer number indicator (1/2/3) are lit on the display window. Daily timer turns on the system at the same time everyday until the timer setting is canceled manually or another daily timer is activated. -
Page 84: Sleep Timer
Setting the Various Timer (continued) Sleep Timer When the time you specify elapses, the system will be turned off by itself. Press SLEEP. Each time you press the button, the time indicated on the display window on the main unit changes (in minutes). -
Page 85: Reference
Troubleshooting When you encounter a problem that seems to be a fault, check the following points before contacting your JVC service center: Power source 7 Power does not come on. • The power cord is not connected to the main unit or an AC outlet. -
Page 86: Language Codes
Troubleshooting (continued) Others 7 It is not possible to switch audio or subtitles between languages. • The disc does not contain 2 or more languages. → If only a single language is recorded on the disc, switching to another language is impossible (page 24). -
Page 87: Specifications
Specifications General Power source: AC 120 V , 60 Hz Power consumption: 25 W (in operation) 1.0 W (on standby) Weight: 2.7 kg External dimensions (W x H x D): 150 mm x 152 mm x 246 mm DVD player Playable discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD, CD-R/RW (CD, VCD, MP3, WMA, JPEG format), DVD-R/-... - Page 88 EN, FR 2005 Victor Company of Japan, Limited 0205AIMMDWJEM...