Recording Timer - JVC CA-UXQD9S Instructions Manual

(Continued)
Using the Timers

Recording Timer

You can use the recording timer function to record
FM/AM broadcasts or sound from other equipment
to cassette tape.
You can enter up to three timer settings in total for
the recording timer and the playback timer
( page 48).
NOTE
• Timer settings remain unchanged until the timer is
replaced by new setting.
1
Prepare the sound source.
Radio Preset the radio station whose
broadcast you want to record.
( page 20)
Other Follow the operation manual for the
equipment equipment.
2
Insert a cassette tape. (
42)
3
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER1" is selected
Timer number
4
Press .
5
Press ,
starting time and ending time.
Example:To set the recording time from 6:30
a.m. to 6:45 a.m.
• You can use the number buttons to set the
recording time. Refer to "Using the number
buttons" ( page 16).
• For setting the clock, refer to "Setting the
Clock" ( page 16).
Entering the "hour" →
"minute" →
6
Press or
"ONCE" or "EVERYDAY".
47
page
or to set the
→ Entering the
to select
ONCE : The recording timer works
once.
EVERYDAY : The recording timer works
every day.
7
Press .
8
Press or
TIMER".
• "REC" stands for "Recording".
9
Press .
10
Press or
sound source.
Example: To record an FM broadcast to a
cassette tape
• When you want to record sound from other
equipment, you cannot use the recording
timer function to start playback on any
equipment other than this product.
■When you want to record an FM/AM radio
broadcast
• Press , and then press
the number buttons to select the preset
number of the radio station whose broad-
cast you want to record. Refer to "Using
the number buttons" (
11
Press .
• The settings appear in the display window.
Confirm the settings.
12
When the main unit is on, press
to turn off the main unit.
• While the recording timer is functioning, the
volume is set to "0" and no sound is pro-
duced from the speakers or headphones.
• The recording timer is available only when
the main unit is turned off.
NOTE
• During operation, you can return to the previous
step by pressing
timer settings by pressing
not stored.
Introduction
to select "REC
to select a
, or
page 16).
. You can quit the recording
. The settings are