JVC CA-UXQ1S Instruction Manual page 43

5
Press or
"ONCE" or "EVERYDAY".
ONCE : The recording timer works once.
EVERYDAY: The recording timer works every
day.
6
Press .
7
Press or
TIMER".
• "REC" stands for "Recording".
8
Press .
9
Press or
combination of a sound source
and recording medium.
Example: To record an FM broadcast to an MD
• When you want to record sound from other
equipment, you cannot use the recording
timer function to start playback on any
equipment other than this product.
■When you want to record an FM/AM radio
broadcast
• Press , and then press
the number buttons to select the preset
number of the radio station whose broad-
cast you want to record. Refer to "Using
the number buttons" (
10
Press .
• When you use an MD as the recording
medium, proceed to step 11.
• When you use a cassette tape as the
recording medium, the settings appear in
the display window. Confirm the settings,
and then proceed to step 13.
11
Press or
MDLP mode (
12
Press .
• The settings appear in the display window.
to select
to select "REC
to select the
, or
page 10).
to select the
page 23).
13
When the main unit is on, press
to turn off the main unit.
• While the recording timer is functioning, the
volume is set to "0" and no sound is pro-
duced from the speakers or headphones.
• The recording timer is available only when
the main unit is turned off.
NOTE
• During operation, you can return to the previous
step by pressing . You can quit the recording
timer settings by pressing
not stored.
• When you want to change the track mark
options, make the change before or after setting
the recording timer. (
25 and 26)
Canceling the recording timer
In step 2 on page 39, select the timer number you
want to cancel, and then press
Even when you cancel the recording timer, the set-
ting remains stored.
Activating the recording timer again
In step 2 on page 39, select the timer number you
want to activate, and then press
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
• When you want to activate two or three recording
timers, leave a blank time of 2 or more minutes
between the ending time of the first recording timer
and the starting time of the second recording timer.
If the blank time is less than 2 minutes, the second
recording timer does not work.
• When the power plug is disconnected or the
power is cut, the recording timer settings may be
lost. If the settings are lost, set the clock and
recording timer again.
Introduction
. The settings are
step 3 and 4 on pages
.
repeatedly
40