Canon MX860 series Manual page 893

ScanGear (Scanner Driver) Does Not Start
>
Advanced Guide Troubleshooting
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers are installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
Do not select the model name that includes WIA in it.
Note
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.
>
Problems with Scanning > ScanGear (Scanner Driver) Does Not Start
Pagina 893 din 1009 pagini
Page top