Toyota Land Cruiser 1998 User Manual page 244

WWW.MANUALS.WS
TRANSFER
Oil capacity, L (qt., Imp. qt.)
1.3 (1.4, 1.1)
Oil type:
Gear oil API GL- 4 or GL- 5
Recommended oil viscosity:
SAE 75W- 90
AUTOMATIC TRANSMISSION
Fluid capacity (drain and refill), L (qt.,
Imp. qt.)
Up to 1.9 (2.0, 1.7)
Fluid type:
Automatic transmission fluid D–II
R R
DEXRON III (DEXRON II)
DIFFERENTIAL
Oil capacity, L (qt., Imp. qt.):
Front 1.7 (1.8, 1.5)
Rear
With rear differential lock system
3.2 (3.4, 28)
Without rear differential lock system
3.3 (3.5, 2.9)
244
WWW.MANUALS.WS
Oil type:
Standard differential
Hypoid gear oil API GL- 5
Limited slip differential
Hypoid gear oil for limited slip differ-
ential API GL- 5
Recommended oil viscosity:
Above -18 C (0 F)
SAE 90
Below -18 C (0 F)
SAE 80W or 80W- 90
CHASSIS LUBRICATION
Wheel bearings:
or Lithium base wheel bearing
NLGI No. 2
Front drive shaft thrust bushings:
Synthetic oil and lithium soap base chassis
grease, NLGI No.1
Propeller shafts:
Lithium base wheel bearing
NLGI No. 2
BRAKES
Minimum pedal clearance when depressed
with the pressure of 490 N (50 kgf, 110
lbf) with the engine running, mm (in.):
116 (4.6)
Pedal freeplay, mm (in.):
1—6 (0.04—0.24)
Pad wear limit, mm (in.):
1.0 (0.04)
Lining wear limit, mm (in.):
1.0 (0.04)
Parking brake adjustment when pulled with
the force of 196 N (20 kgf, 44 lbf):
4—6 clicks
grease,
Fluid type:
SAE J1703 or FMVSS No. 116 DOT 3
STEERING
Wheel freeplay:
Less than 40 mm (1.6 in.)
grease, Power steering fluid type:
Automatic transmission fluid DEXRON
or III
SUSPENSION
Fluid type:
Suspension fluid AHC
R
II