Setup The Machine And The Computer - Canon PIXMA MX860 series Getting Started

o
Setup the Machine and the Computer
Windows
•
~
@
ComectpnnterIOl:henecwon<'Of!heflrsl:f1me
Selealhls opaOO'l'lOenyouwercto use 8 pnrter lhac: IS
noI connected to !he nefWOlkyet, Vl8V1'red 01' WHeleSs
LAN N9twofk
sewp
IS perfooned t1{ Comectlng
me
ponterfOlhecompu:erV\lllhUSBcable
o
Pnrrl;lflS8ll'eadiconnectedtothenetWOrk
Se.ectlt1ls OPOonYlNn'1OOwarttoUS8 8 pnrurlhel: IS
~8OIconnectedtoltlenerwork.rrom~cClfJ1Xl9r
Select ltv!! optIOO also VItlen WIreleSs LAN hes beeo
sal:
up
IJSlng
V\PS (VVI.Fi Protected Senc>l OfWCN
('Mndows Como<l Now)
Ne,..
On the Setup Method screen, select
Connect printer to the network for
the first time, then click Next.
When a confirmation screen for the
machine's LAN setting appears, click OK.
~--------
• Set the machine's LAN setting to Wireless
LAN active beforehand. For details, refer
to "9 Machine's LAN Setting" on page 16.
W _
• Use the supplied USB cable.
~-~.aa
USB
When the Printer Connection screen appears, connect the machine to the computer with a USB cable.
Set up the machine over a USB connection until the network connection is complete.
w _
• The USB port is located on the right side at the back of the machine.
II
II
II
II
II
II
II
II
II