Programing The Playing Order Of The Tracks - Program Play - JVC CA-MXS6MD Instructions Manual

To go to another track
On the remote control:
Press ¢ (¡) or 4 (1) repeatedly.
• ¢ (¡) : Skips to the beginning of the next or
succeeding tracks.
• 4 (1) : Goes back to the beginning of the current or
previous tracks.
On the unit:
Push repeatedly (or hold) the joy control rightward
(¢ ) or leftward (4 ).
• Rightward (¢ ) : Skips to the beginning of the next
or succeeding tracks.
• Leftward (4 ) : Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons (on the remote control ONLY)
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control:
1
Load an MD.
• If the current playing source is not the MD recorder,
press MD 3 / 8, then 7 before going to the next step.
2
Press PLAY MODE so that "MD PROGRAM"
appears in the main display.
The PRGM indicator also lights.
• Each time you press the button, play mode changes
as follows:
Program play
(MD PROGRAM)
Normal play
(MD NORMAL)
Random play
(MD RANDOM)
– 28 –
3
Press the number buttons to select the tracks.
• For how to use the number buttons, see "To go to
another track directly using the number buttons (on
the remote control ONLY)" to the left.
Track No.
Ex. When selecting track 5
• If the selected track has a title, it will be shown at the center
portion of the main display. (If the title is long and cannot
be shown at a time, the unit scrolls the title to show the
entire title.)
4
Press MD 3 / 8.
The tracks are played in the order you have programed.
On the unit:
You have to use the menu for the following operations. For
general information on the menu, see pages 59 and 60.
1
Load an MD.
• If the current playing source is not the MD recorder,
press MD # / 8, then 7 before going to the next step.
2
Select Program play mode using the menu.
(See also page 61.)
1) Press MENU.
"MENU" appears in the main display.
2) Push the joy control downward ( ) to select
"MD (current play mode setting*)."
* The current play mode — NORMAL,
RANDOM, or PROGRAM will appear following
"MD" in the main display.
3) Push the joy control rightward ( ) or leftward
( ) to select "PROGRAM."
Continued
Total playing time
Step No.