Table of Contents
Advertisement
SEction
•
( Tuner
RDS5etup
o
AF(Alternative Frequencies)
Press it to activate AF function.
U
TA (Traffic Alarm)
Press it to activate TA function.
o ./..,.
Press it to select PTY code.
D
PTY(Program Type)
Press it to activate PTY function.
U
During PTY ON, press this button to
search the playing track's type.
D
BACK
Press it to turn to return to the radio.
UPS:
To display the current RDS station's
programs information.
U
SEEK+/-
Press it to tune automatically.
o
TP(Traffic Program)
TP OFF: the current station doesn't have
any trafic programs;
TP Search: Search for stations with traffic
programs;
TP ON: the current staion is broadcasting
trafic program
0
II!)
EON ON(Enhanced Other Networks
information)
EON OFF: No station has TP;
EON ON: RDS signal finds that another
station is broadcasting trafic program and
reminds the user of searching this station.
Alternative Frequencies
Briefly press eAF to activate the auto
searching station function. When AF is on,
the unit will skip to the RDS Frequency
with good signal.
@
Note:
*
It is also performed by pressing" in the
monitor.
Traffic Alarm
Briefly press
&1
TA to activate the traffic
alarm function. When AF is on, there is lA
displayed on the LCD. Ifthere is no TP, the
mode will search TP stations automatically.
The TA is green when it is played by a sta-
tion, if not, it is yellow.
When TAis playing, the volume will be ad-
justed to a TA level automatically When in
other modes (such as DISC,AUX), if a TA
program is played, the mode will skip to the
RDS status automatically. It will resume to
the primary mode after the TA is over.
@
Note:
*
It is also performed by pressing. in the
monitor.
*
When TA is off, the LCD will not display TA.
Program Type
Briefly pressing. PTY to activate PTY
function.
When PTY is on, PTY ON appears in the
monitor. You can press UP/DOWN
to select the program type, and then press
PTY CODE to search the special program.
The monitor displays PTY SEARCH.
IfPTY is off, PTY OFF appears in the
monitor and the searching is disabled.
@
Note:
*
It is also performed by pressing 0
in the
monitor.
Advertisement
Table of Contents
