SonicWALL NSA 240 Getting Started Manual page 45

Activating Licenses in SonicOS
After completing the registration process in SonicOS, you must
perform the following tasks to activate your licenses and enable
your licensed services from within the SonicOS user interface:
• Activate licenses
• Enable security services
• Apply services to network zones
To activate licensed services in SonicOS, you can enter the
license keyset manually, or you can synchronize all licenses at
once with MySonicWALL.
The Setup Wizard automatically synchronizes all licenses with
MySonicWALL if the appliance has Internet access during initial
setup. If initial setup is already complete, you can synchronize
licenses from the System > Licenses page.
Manual upgrade using the license keyset is useful when your
appliance is not connected to the Internet. The license keyset
includes all license keys for services or software enabled on
MySonicWALL. It is available on
the top of the Service Management page for your SonicWALL
NSA appliance.
Page 40 Activating Licenses in SonicOS
<http://www.sonicwall.com>
To activate licenses in SonicOS:
1. Navigate to the System > Licenses page.
2. Under Manage Security Services Online do one of the
following:
• Enter your MySonicWALL credentials, then click the
Synchronize button to synchronize licenses with
MySonicWALL.
• Paste the license keyset into the Manual Upgrade
Keyset field.
3. Click Submit.
Enabling Security Services in SonicOS
SonicWALL security services are key components of threat
management in SonicOS. The core security services are
Gateway Anti-Virus, Intrusion Prevention Services, and Anti-
Spyware.
You must enable each security service individually in the
at
SonicOS user interface. See the following procedures to enable
and configure the three security services that must be enabled:
• Enabling Gateway Anti-Virus - page 41
• Enabling Intrusion Prevention Services - page 42
• Enabling Anti-Spyware - page 43
• Enabling Content Filtering Service - page 44