Toshiba RAS-18N3KVR-E Service Manual page 102

No. Part name
Electronic
‰
expansion valve
coil
Š Fan guard
Procedure
1. Detachment
1) Perform step 1 in
and 1 in … .
2) Remove the coil by rotating it at 90°
toward either direction.
2. Attachment
1) Insert a valve coil in a volve body to the
bottom, and fix it by rotating at 90° toword
either direction. And confirm to fix it surely.
1. Detachment
1) Perform work of item 1 of
2) Remove the front cabinet, and put it down
so that fan guard side directs downward.
Perform work on a corrugated cardboard,
cloth, etc. to prevent flaw to the product.
3) Remove the hooking claws by pushing minus
screwdriver according to the arrow mark in
the right figure, and remove the fan guard.
2. Attachment
1) Insert claws of the fan guard in the holes
of the front cabinet. Push the hooking
claws (9 positions) by hands and fix the
claws.
Check that all the hooking claws are fixed
to the specified positions.
‚ , all the steps in ƒ
‚ .
– –
101
FILE NO. SVM-12070
Remarks
Lead
connecting part
Minus screwdriver
Hooking claw