Pppoe - D-Link AC750 User Manual

Section 3 - Configuration
My IPv6 Connection is: Select PPPoE from the drop-down menu.
PPPoE Internet
Enter the PPPoE account settings supplied by your Internet
Connection Type: provider (ISP).
PPPoE Session: Select Create a new session if you have IPv6.
Select Static IP if your ISP assigned you the IP address, subnet
Address Mode:
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP.
Enter the IP Address (Static PPPoE only).
IP Address:
User Name: Enter your PPPoE Username.
Enter your PPPoE Password and then retype the password in the
Password:
next box.
Service Name: Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or Manual.
Reconnect Mode:
Maximum Idle Time: Enter a Maximum Idle Time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
IPv6 DNS Settings: Select either Obtain IPv6 DNS servers automatically or Use the
following IPv6 DNS servers
Enter the primary and secondary DNS Server addresses.
Primary/Secondary IPv6
DNS Servers:
D-Link DIR-818LW User Manual

PPPoE

65