Setting The Clock And Timer; Setting The Clock; Using Timer - JVC 0609YAMMDWBET Instructions Manual

Setting the Clock and Timer

Setting the Clock

Set the built-in clock before using Timer.
• You can set the clock when the unit is turned on or on standby.
Activate the clock setting mode.
1
• If you have already set the clock before, press the button twice to activate the
clock setting mode.
1 Set the hour while the hour digits of the time indication flashes on the
2 Set the minute while the minute digits of the time indication flashes on the
3 Select the day of the week.
2
• To exit from the clock setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
• If a power failure occurs, the clock loses the setting and is reset to "0:00." You need to adjust the
clock again.

Using Timer

Using Timer, you can wake up with music, etc.
• Deactivate Motion Sensor when you use Timer (P.6) .
• When using iPod or other equipment as the playback source, connect it to the unit beforehand.
(P.13, P.19)
• You can set Timer when the unit is turned on or on standby.
• The unit is turned off automatically 2 hours after it is turned on by Timer.
Activate the timer setting mode.
1
20
"ADJCLOCK" appears then the hour digit of the time indication flashes on
the display.
TIMER 1/TIMER 2/TIMER 3
Canceled
display.
display.
SUN DAY MON DAY
(Sunday) (Monday)
THU DAY
FRI DAY
(Thursday) (Friday)
"CLOCK OK" appears and the built-in clock starts working.
"TIMER 1," "TIMER 2" or "TIMER 3" appears on the display.
*
Clock setting
TUE DAY WED DAY
(Tuesday) (Wednesday)
SAT DAY
Back to the beginning
(Saturday)
*
See "Using
Timer".