Advertisement
Basic operation
STANDBY lamp
1
1
Turn on the power.
2 2
Select a source.
Stereo mini plug cord (not supplied)
Headphones (not supplied)
The HP indicator lights up when headphones are connected to the System.
•
Be sure to turn down the volume before connecting or putting on the headphones.
DO NOT turn off the System with the volume set to an extremely high level; otherwise,
the sudden blast of sound may damage your hearing, speakers, and headphones when you
turn on the System or start playback.
Stereo mini plug cord
(not supplied)
External
device
Playback operation
1
TUNER FM
AUDIO IN
2
Start playback of the external device.
Adjusting the audio input level
You can change the audio input level through the AUDIO IN jack.
HIGH
NORMAL
•
This function affects only the sound coming out through the
speakers.
Remote sensor
3 3
Adjust the volume.
iPod
1 1
2 2
3 3
Note:
PTY SEARCH does not function.
Disc/USB
Notes on USB mass storage class device connection
•
Connect a USB mass storage class device when the
System is turned off to prevent malfunction.
•
Do not use a USB hub.
•
When connecting with a USB cable, use a USB 2.0 cable
whose length is less than 1 m.
•
The USB mass storage class device is charged through
the USB MEMORY terminal when "USB" is selected as
the source.
•
You cannot connect a computer to the USB MEMORY
terminal of the System.
•
Electrostatic shock at connecting a USB mass storage
class device may cause abnormal playback of the
device. In this case, disconnect the USB mass storage
class device then reset the System and the USB mass
storage class device.
•
While playing back a file on a USB mass storage class
device, do not disconnect the device. Doing so may
cause malfunction on both the System and the device.
Searching for stations
1
2
(Hold)
FM radio
The station search stops when a station of
sufficient signal strength is found.
To manually stop the search, press ¢ or 4.
•
When you press ¢ or 4 repeatedly, the
•
frequency changes step by step.
•
When an FM program is broadcast in
stereo, the S (stereo) indicator lights
up.
Notes on iPod connection
iPod
•
When detaching the dock adaptor from the dock,
pull up the dock adaptor with your fingernail or sharp
pointed tool using the slot.
•
DO NOT connect or disconnect the iPod when the
Dock adaptor (supplied with
System is turned on.
the iPod or sold separately)
•
Be sure to reduce the volume on the System to the
minimum level before connecting iPod. Adjust the
volume after starting playback.
•
You cannot send any data to the iPod from the System.
•
Do not carry the System with iPod connected. It might
cause damage to the dock or you might drop the iPod.
•
Do not touch or hit the iPod terminal pins or connector
pins in the dock for iPod directly. Doing so might cause
damage to the connector pins.
•
iPod is charged through the dock when the System is
turned on.
Repeat Play
Playback operations
Label side
REP TRK
REP GRP
REP ALL
To open the disc tray
REP OFF Off
Press 0 on the main unit.
To play back/pause a disc
Press CD 6.
Random Play
To play back/pause a USB mass storage class device
Press USB 6.
1
USB mass storage
To select a track
Press ¢ or 4.
class device
To fast-forward a track
Press and hold ¡.
RND GRP RND
To fast-reverse a track
Press and hold 1.
RND ALL RND ALL
To select a group
Press UP or DOWN.
RND OFF Off
To stop playback
2
Press 7.
2
Improving the reception
To improve the reception
MONO
STEREO
TUNER FM
AUDIO IN
•
When the monaural mode is activated, the stereo effect
is lost.
(Hold)
Before viewing a video/picture from your iPod on your monitor:
Make the appropriate video setting on iPod. For details of the setting, see the instruction manual for iPod.
Be careful not to injure your fingertips
or damage the terminal of the direct
Playback operations
dock.
*
Information shown on the display differs depending
on the type of the iPod.
To play back/pause iPod
Press iPod 6.
To select a track
Press ¢ or 4.
To fast-forward a track
Press and hold ¢.
To fast-reverse a track:
Press and hold 4.
To play back at random
Press RANDOM repeatedly.
To play back repeatedly
Press REPEAT repeatedly.
To put iPod in sleep mode
Press and hold iPod 6.
Program Play
While playback is stopped...
1
1
Repeats the current track.
Repeats all tracks in the current group
2
Select a track number (up to 32 tracks).
(MP3/WMA only).
ALL Repeats all tracks.
Cancels.
•
To cancel, press CANCEL.
3
or
To check the programmed contents, press 4 or ¢.
•
•
To erase the entire program, press and hold CANCEL.
The PRGM indicator is turned off.
To exit from Program Play, press 7. The PRGM indicator
•
Plays tracks in the current group
is turned off.
in a random order (MP3/WMA
–
The stored program is kept.
only).
Plays all tracks in a random
order.
Cancels.
or
Presetting stations
You can preset up to 30 FM stations.
While listening to a target station...
1
2
Select a preset number.
3
To erase a preset station
1
Tune in to a preset station (see below).
2
3
Tuning in to a preset station
Menu operations
To display the menu/to go back to the previous menu
To select an item on the menu
Notes:
•
Operate iPod touch itself in the following cases:
–
When operating the home button.
–
When selecting application icons on the home screen.
–
When dragging the slider.
•
Sound distortion may occur when playing back audio
sources with high recording levels. If distortion occurs,
it is recommended to turn off the equalizer of iPod. For
information on operating the iPod, see the instruction
manual for iPod.
Resume Play
This System stores the beginning of the stopped track.
RESUME
Canceled
When you start playback again, it starts from the
beginning of the stored track.
•
To clear the stored position, perform one of the
following operations:
Press 7 twice.
–
–
Open the disc tray.
–
Disconnect the USB mass storage class device.
•
This function cannot be used for Program Play.
Prohibiting disc ejection
You can lock the disc tray.
While the System is on standby...
(On the main unit)
LOCKED
UNLOCKED
(While holding...)
Advertisement
