General Product Specification - Philips 190S8FS/00 Service Manual

HUDSON 8
88

18. General Product Specification

CONTENTS
1 FOREWORD
2 PRODUCT PROFILE
2.1 LCD
2.2 SCANNING FREQUENCIES
2.3 AMBIENT TEMPERATURE: 0 °C - 35 °C
3 ELECTRICAL CHARACTERISTICS
3.1 INTERFACE SIGNALS
VIDEO: 0.7 Vp-p, INPUT IMPEDANCE, 75 OHM @DC
3.2 INTERFACE
3.3 TIMING REQUIREMENT
3.4 HORIZONTAL SCANNING
3.5 VERTICAL SCANNING
3.6 POWER INPUT CONNECTION
3.7 POWER MANAGEMENT
3.8 ANALOG DISPLAY IDENTIFICATION
3.9 DVI-D DISPLAY IDENTIFECATION
3.10 USB PLUG SUPPORT
3.11 DDC/CI SUPPORT
3.12 EDID
3.13 HOT-KEY DEFINITION
3.14 SMART CONTRAST --DYNAMIC BRIGHTNESS CONTROL (DBC) (NOT REQUEIRED FOR THIS
PRODUCT)
3.16 SMART IMAGE
3.17 SMART IMAGE (NOT REQUIRED FOR THIS PRODUCT)
4 VISUAL CHARACTERISTICS (DYNAMIC CONTRAST RATIO)
4.1 TEST CONDITIONS
4.2 BRIGHTNESS
4.3 IMAGE SIZE
4.4 BRIGHTNESS UNIFORMITY
4.5 CHECK CROSS TALK (S)
4.6 WHITE COLOR ADJUSTMENT
5 MECHANICAL CHARACTERISTICS
5.1 COSMETIC PHILIPS ID
5.2 MECHANICAL DATA FILES
5.3 LOCATION OF PHILIPS LOGO
5.4 GAP BETWEEN PANEL AND FRONT BEZEL
5.5 LOCATION OF CONTROL ICONS
5.6 COLOR FOR RESIN/PAINT
5.7 RESINS
5.8 IF RAINT IS USED
5.9 PLASITIC MOLD TOOLING
PROE FILES REQUIRED
PER PHILIPS MAKE-UP SHEET
<0.8 (TYP) MM
PER PHILIPS GRAPHIC SHEET
PER PHILIPS MAKE-UP SHEET