Citizen iDP3550 Service Manual page 11

6. Removing the Auto Cutter AC-134
(1) Remove the top cabinet.
(2) Cut the cable tie
nism, free.
(3) Disconnect the one connector from the control board.
(4) Loosen (not remove) the one screw (M2.6 6)
mounting holes on the printer mechanism chassis to remove the auto cutter.
to set the cable of the auto cutter AC-134, that is fastened to the printer mecha-
7
iDP3550/3551 Service Manual
and disengage both cutter BK from the cutter BK
CITIZEN