Bulb Replacement; High Intensity Discharge; (Hid) Lighting; Taillamps, Turn Signal, Sidemarker, Stoplamps, And Back-Up Lamps - Cadillac 2012 Escalade EXT Owner's Manual

10-34 Vehicle Care

Bulb Replacement

For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 35.
For any bulb changing procedure
not listed in this section, contact
your dealer.

High Intensity Discharge

(HID) Lighting

WARNING
The low beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.
The vehicle may have HID
headlamps. After an HID headlamp
bulb has been replaced, you may
notice that the beam is a slightly
different shade than it was originally.
This is normal.
Taillamps, Turn Signal,
Sidemarker, Stoplamps,
and Back-Up Lamps
To replace one of these bulbs:
A. Stoplamp/Turn Signal/Taillamp
B. Back-up Lamp
C. Sidemarker Lamp
I n f o r ma t i o n P r o v i d e d b y :
1. Open the tailgate. See Tailgate
on page 2 15 for more
information.
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly
rearward until disengaging the
two outer pins of the taillamp
assembly from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Pull the bulb straight out from
the socket.