Removal Of Ds-Board; Removal Of Hx-Board; Removal Of Dn-Board; Removal Of P-Board - Panasonic TH-42PH10UKA Service Manual

TH-37PH10UK / TH-42PH10UK
6.5.

Removal of DS-Board

1. Remove the HU Terminal Block and the HA Terminal Block.
(Refer to Removal of HU-Board and HA-Board)
2. Remove the Slot Block.
(Refer to Removal of Slot Block)
3. The Slot Block is turned inside out.
4. Remove 6 screws and then remove the Slot Cover.
5. Remove 4 screws.
6. Release the connector (DS14) from HX-Board and then
remove DS-Board.
6.6.

Removal of HX-Board

1. Remove the HU Terminal Block and the HA Terminal Block.
(Refer to Removal of HU-Board and HA-Board)
2. Remove the Slot Block.
(Refer to Removal of Slot Block)
3. Remove the DS-Board.
(Refer to Removal of DS-Board)
4. Remove 2 screws and then remove the Slot Case.
5. Remove 4 Hexagonal-Head screws and 1 screw and then
remove HX-Board.
6.7.

Removal of DN-Board

1. Disconnect the connector (DN6).
2. Remove the Flexible Cable from the connector (DN1).
3. Remove 4 screws and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS mode
after DN-Board exchange.
6.8.

Removal of P-Board

1. Disconnect the connectors (P2, P6, P7, P9, P11, P12, P25)
2. Remove 10 screws and then remove P-Board and the P-
Board Bracket.
12