Remove The C1-Board; Remove The C2-Board; Remove The C3-Board; Remove The Plasma Panel Section From The Cabinet Assy (Glass) - Panasonic TC-P50S2 Service Manual

8.14. Remove the C1-Board

1. Remove the flexible cables holder fastening screws (×8
).
2. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
3. Disconnect the flexible cable (C10).
4. Remove the screws (×4

8.15. Remove the C2-Board

1. Remove the Hanger metal R and the Stand bracket R.
(See section 8.13.)
2. Remove the flexible cables holder fastening screws (×8
).
3. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
4. Disconnect the flexible cables (C20, C21 and C26).
5. Remove the screws (×4

8.16. Remove the C3-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the Stand bracket L.
(See section 8.13.)
3. Remove the flexible cables holder fastening screws (×14
).
4. Disconnect the flexible cables (CB9, CB10, CB11, CB12,
CB13, CB14 and CB15).
5. Disconnect the flexible cables (C31 and C36).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (×5
) and remove the C1-Board.
) and remove the C2-Board.
) and remove the C3-Board.
8.17. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the cabinet assy and the plasma panel fastening
screws (×3 ).
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
25