Panasonic TC-P50VT20 Service Manual page 147

TC-P50VT20
TC-P50VT25 TC-P50VT25L TC-P50VT25X
Please revise the original parts list in the Service Manual to conform to the change(s) shown herein.
If new part numbers are shown, be sure to use them when ordering parts.
Please file and use this manual together with the service manual for
Model No. TC-P50VT20 ORDER NO. MTNC100214CE
Model No. TC-P50VT25 ORDER NO. MTNC100442AE
Model No. TC-P50VT25L ORDER NO. MTNC100559AE
Model No. TC-P50VT25X ORDER NO. MTNC100558AE
Subject : SCREWDRIVER FOR BATTERY COVER OF 3D EYEWEAR
Reason for Change
*The circled item indicates the reason. If no marking, see the Notes in the bottom column.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The circled item indicates the interchangeability. If no marking, see the Notes in the bottom column.
Parts Set Production
A Original Early
New Late
B Original Early
New Late
C Original Early
New Late
D Original Early
New Late
E Other
Part Number
Model No. Ref. No.
see above 46
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Original parts may be used in early production sets only. New parts may be used in early or late
production sets. Use original parts where possible, then stock new parts.
New parts only may be used in early or late production sets.
Stock new parts.
Original parts may be used in early production sets only. New parts may be used in late production
sets only. Stock both original and new parts.
Original Part No. New Part No.
TPAKK31 not supplied
ORDER NO.ITD1006042PE
Qty Part Name & Descriptions
SCREWDRIVER FOR BATTERY COVER OF 3D
EYEWEAR
© Panasonic Corporation
copying and distribution is a violation of law.
B34 Canada: B62
2010. Unauthorized