Operating The Tuner; Storing The Preset Stations - JVC LVT0142-006A Instructions Manual

Operating the Tuner (Also see pages 13 and 14)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move
to "TUNER
CONTROL," then
press @ / #.
The TUNER CONTROL menu
appears.
4. Press % / fi to move
set or adjust, then press @ / #.
On the TUNER CONTROL menu, you can do the following:
"PRESET CH":
"BAND":
"FREQUENCY":
"FM MODE":
"PRESET MEMORY": See "Storing the Preset Stations"
Note:
* Not displayed when an AM station is selected.
5. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
to the item you want to
Select a preset channel station.
Select the band.
Tune in a station manually.
Select the FM reception mode.*
below.
Storing the Preset Stations (Also see page 13)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move
CONTROL," then press @ / #.
The TUNER CONTROL menu appears.
4. Tune into a station on the TUNER CONTROL
menu, referring to "Operating the Tuner" above.
5. Press % / fi to move
to "PRESET
MEMORY," then press
@ / #.
The PRESET MEMORY menu
appears.
6. Press @ / # to select a
preset station number
you want.
7. Press ON SCREEN
SET to store the setting.
8. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
to "TUNER
24