Canon Optura 60 Instruction Manual page 109

2. Press the MENU button and select [VCR SETUP]. Select
[AV~
DVI=]
(OPTURA60) or
[AV~
DV] (OPTURA50), set it to [ON] and press the
MENU button.
3. Selecting the still image quality:
~
Press the FUNC. button. Select the still image quality symbol followed
by a setting option and press the FUNC. button.
Selecting the movie size:
Press the FUNC. button. Select the movie size symbol followed by a
setting option and press the FUNC. menu.
4. Connected device: Load a recorded cassette and play back the tape.
When recording a still image:
5. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
6. Press the PHOTO button fully.
The card access indicator flashes.
When recording a movie:
5. Press the startlstop button when the scene you wish to record
appears.
Pressing the start/stop button again stops recording.
o
Headphones cannot be used during analog line-in recording.
o
Depending on the signal sent from the connected device, dUbbing may not work
properly (e.g. signals that include copyright protective signals or anomalous
signals such as ghost signals),
o
We recommend powering the camcorder from a household power source.
o
An image recorded from an image in widescreen mode will be vertically
compressed.
o
The data code of the image will reflect the date and time it has been recorded
on the memory card.
-
m
Co
;:::;:
5'
a:::l
109